Water Jet Cutting Equipment And Everything You Need To Know About It
5 of the most important benefits of a water jet cutting equipment
If you have already manufactured with the water jet cutting systems or is still starting to get a head start for it, you should be able to know all of the benefits that it is going to give you. There are benefits that can be provided by the water jet cutting systems and it would be helpful to you in making a good business decision if you are able to read more about it from this article.
The abrasive and pure waterjet cutting are the two kinds of methods that you need to know of when it comes to the water jet cutting systems. When you are going to cut soft materials such as paper or foam, it would be best to use the pure waterjet cutting method where only water stream is used for cutting. This is in contrast with the abrasive waterjet cutting method wherein a granular abrasive needs to be added in the water stream. When you need to cut ceramics, metal, or any hard materials, the method that you should use is the abrasive waterjet cutting because the granular abrasive will add power to the cutting stream.
If you want to increase your knowledge about the waterjet technology, here are five benefits that will help you with it:
1. There is no limitation when it comes to the materials
There are a lot of materials that you can cut with the use of the water jet cutting systems such as plastics, composites, rubber, ceramics, rock or stone, and metals. A 200mm thickness is achievable as long as you are going to add a granular abrasive to your waterjet cutting machine to make it perform better.
2. HAZ or the heat affected zone is among some of the things that you don’t have to worry about
The HAZ or the heat affected zone should be less of your worries since the water jet cutting equipment is made up of a cold cutting method. The risks of burns will be eliminated so the operator’s safety is therefore guaranteed along with the fact that clean cuts are enabled due to cold cutting.
3. Materials are not being distorted
It is possible to bypass any heat exposure because of the cold cutting method that is why there is no need for you to think that your material will be distorted especially if it is a hard one such as metal. You can be sure that you will be able to get a smooth finish as well as a burr-free cut.
4. You do not have to add any finishing process to your product
The products will be provided with the highest cutting quality with accurate results that is why you do not need to worry about any finishing process that you might need to apply.
5. Any hazardous waste is totally being eliminated
It is a must for business establishments these days to make sure that their products are environmentally friendly since this process is becoming more apparent in the industry.